Gas Furnace

Goodman Gas Furnace Not Igniting

Goodman Gas Furnace Not Igniting

What are the Common Causes of Goodman Gas Furnace Not Igniting?

The most common causes of a Goodman gas furnace not igniting include:

  1. Faulty Ignitors:
  2. Hot Surface Ignitor (HSI) Issues: The HSI may not be glowing properly or may be dirty, preventing ignition. Cleaning the HSI with a soft cloth or replacing it if damaged can resolve this issue.

  3. Ignitor Resistance: If the ignitor is cold, it may not meet the startup criteria, leading to delayed or failed ignition. This can be checked using a multimeter to ensure continuity.

  4. Gas Supply Issues:

  5. Blocked Gas Ports: Rust or debris in the burner tubes or carryover ports can disrupt gas flow, preventing ignition. Cleaning these ports is essential.

  6. Low Gas Pressure: Incorrect air/fuel mix due to low gas pressure can prevent combustion. Checking the gas supply valve and ensuring it is open is crucial.

  7. Thermostat Malfunctions:

  8. Incorrect Settings: Ensure the thermostat is set to “heat” and “auto” rather than “on.” Incorrect settings can prevent the furnace from igniting properly.

  9. Faulty Thermostat: A malfunctioning thermostat can send incorrect signals to the furnace, preventing ignition. Checking thermostat wiring and connections for damage is necessary.

  10. Electrical Problems:

  11. Power Issues: Ensure the furnace has a stable power supply. Check the circuit breaker or fuse box for any issues and reset or replace as needed.
  12. Circuit Board Problems: Issues with the circuit board, such as faulty power control boards or incorrect voltage supply to the gas valve, can prevent ignition. Testing power with a multimeter is recommended.

How to Troubleshoot and Diagnose a Goodman Gas Furnace Not Igniting?

Goodman Gas Furnace Not Igniting

  1. Safety Precautions:
  2. Always turn off the power to the furnace before performing any internal checks or repairs.

  3. Use protective gear such as gloves and safety glasses.

  4. Tools Needed:

  5. Multimeter
  6. Soft cloth or canned air for cleaning
  7. Steel wool (detergent-free) for cleaning the flame sensor

  8. Screwdriver for accessing internal components

  9. Diagnostic Steps:

  10. Check Thermostat Settings: Ensure the thermostat is set correctly to “heat” and “auto”.
  11. Verify Power Supply: Check the circuit breaker or fuse box and reset or replace as necessary.
  12. Inspect Ignitor: Check the HSI for proper glowing. If it’s dirty, clean it with a soft cloth or replace it if damaged.
  13. Check Gas Supply: Ensure the gas supply valve is open and check for any blockages in the gas ports.
  14. Measure Voltage: Use a multimeter to check the voltage supply to the gas valve and circuit board. Ensure it reaches the required 27-28 volts during the ignition cycle.

  15. Clean Burner Ports: Remove and clean the burner tubes and carryover ports if they are blocked by rust or debris.

  16. Potential Solutions and Repairs:

  17. Replace Ignitor: If the HSI is damaged, replace it with a new one. Estimated cost: $20-$50.
  18. Clean or Replace Gas Ports: Clean the burner tubes and carryover ports. If severely damaged, replace them. Estimated cost: $50-$100.
  19. Repair or Replace Thermostat: If the thermostat is faulty, replace it. Estimated cost: $50-$200.
  20. Repair or Replace Circuit Board: If the circuit board is faulty, replace it. Estimated cost: $100-$300 plus labor.

What are the Relevant Specifications and Product Recommendations for Goodman Gas Furnace?

  • HSI Replacement: Ensure the replacement HSI is compatible with your Goodman furnace model.
  • Gas Valve and Circuit Board: Use parts specifically designed for Goodman furnaces to ensure compatibility and proper function.

Estimated Costs for Goodman Gas Furnace Repairs

  • Ignitor Replacement: $20-$50
  • Gas Port Cleaning/Replacement: $50-$100
  • Thermostat Replacement: $50-$200
  • Circuit Board Replacement: $100-$300 plus labor

Reference

  1. Goodman Furnace Troubleshooting by HVAC.com: This guide provides detailed troubleshooting steps for various Goodman furnace issues, including ignition problems.
  2. Goodman Furnace Won’t Ignite by DoItYourself.com: This forum discussion highlights specific issues related to gas port blockages and circuit board problems.
  3. Goodman Furnace Doesn’t Always Ignite by DIY Chatroom: This thread discusses issues related to delayed gas valve opening and HSI startup criteria.

Leave a Comment